JZTXT

Centos7 yum安装k8s 1.23.0

发布时间 2023-04-21 16:09:13作者: 苦逼yw

本次部署有3个节点，一个master，2个node。其中maser是192.168.18.11，node分别是192.168.18.12、192.168.18.12。

 

一、在master：192.168.18.11上

1、前提条件安装docker，并修改/etc/docker/daemon.json

{
  "registry-mirrors": ["https://qtlj897j.mirror.aliyuncs.com"],   #添加的
  "insecure-registries": [
    "http://192.168.18.11"
  ],
  "exec-opts": ["native.cgroupdriver=systemd"]  #添加的
}

2、关闭selinux

setenforce 0
sed -i 's/SELINUX=permissive/SELINUX=disabled/' /etc/sysconfig/selinux
sed -i "s/SELINUX=enforcing/SELINUX=disabled/g" /etc/selinux/config

3、配置内核参数

vim /etc/sysctl.d/k8s.conf

net.ipv4.ip_forward=1                        # 其值为0,说明禁止进行IP转发；如果是1,则说明IP转发功能已经打开。 
net.bridge.bridge-nf-call-ip6tables = 1        # 是否在ip6tables链中过滤IPv6包 　
net.bridge.bridge-nf-call-iptables = 1　　　　　# 二层的网桥在转发包时也会被iptables的FORWARD规则所过滤，这样有时会出现L3层的iptables rules去过滤L2的帧的问题 
sysctl -p

4、修改hostname，hosts文件

192.168.18.11 tjgjc-ai11
192.168.18.12 tjgjc-ai12
192.168.18.13 tjgjc-ai13

5、禁用交换分区，否则会在k8s初始化时报错，[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get "http://localhost:10248/healthz": dial tcp [::1]:10248: connect: connection refused.

# 禁用交换分区
swapoff -a
# 永久禁用，打开/etc/fstab注释掉swap那一行。
sed -i 's/.*swap.*/#&/' /etc/fstab

 

6、配置k8s阿里云源

vim /etc/yum.repos.d/kubernetes.repo

[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg

7、安装kubeadm、kubectl、kubelet

yum install -y kubectl-1.23.0-0 kubeadm-1.23.0-0 kubelet-1.23.0-0

8、启动kubelet服务

systemctl enable kubelet && systemctl start kubelet

9、初始化k8s，这条命令执行时会卡在[preflight] You can also perform this action in beforehand using ''kubeadm config images pull，大概需要2分钟，请耐心等待。

kubeadm init --image-repository registry.aliyuncs.com/google_containers --kubernetes-version v1.23.0 --apiserver-advertise-address 192.168.18.11 --pod-network-cidr=10.244.0.0/16 --token-ttl 0

 

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.18.11:6443 --token xybjgk.dnutwxyfpdxnratp \
    --discovery-token-ca-cert-hash sha256:21d14e3ebe35ca81caef9653270c5c5a76d841ed4ec18393b3fbdc4fc1deff09

10、看到上面，初始化成功了，上面kubeadm init执行成功后会返回给你node节点加入集群的命令，等会要在node节点上执行，需要保存下来，如果忘记了，可以使用如下命令获取。

kubeadm token create --print-join-command

 11、根据提示：To start using your cluster, you need to run the following as a regular user:。运行以下命令

 mkdir -p $HOME/.kube
 sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
 sudo chown $(id -u):$(id -g) $HOME/.kube/config

 

二、在node节点192.168.18.11、192.168.18.11上

1、前提条件安装docker

2、做maser的2~8步骤的操作

3、加入集群，运行在master初始化k8s时获得的加入集群的命令

kubeadm join 192.168.18.11:6443 --token xybjgk.dnutwxyfpdxnratp \
    --discovery-token-ca-cert-hash sha256:21d14e3ebe35ca81caef9653270c5c5a76d841ed4ec18393b3fbdc4fc1deff09

 

三、在master上安装flannel网络插件

1、从网上找到flannel配置文件，注意配置文件中的"Network"字段要和初始化k8s命令的参数--pod-network-cidr=10.244.0.0/16指定的网段一致。

---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: psp.flannel.unprivileged
  annotations:
    seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
    seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
    apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
    apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
  privileged: false
  volumes:
  - configMap
  - secret
  - emptyDir
  - hostPath
  allowedHostPaths:
  - pathPrefix: "/etc/cni/net.d"
  - pathPrefix: "/etc/kube-flannel"
  - pathPrefix: "/run/flannel"
  readOnlyRootFilesystem: false
  runAsUser:
    rule: RunAsAny
  supplementalGroups:
    rule: RunAsAny
  fsGroup:
    rule: RunAsAny
  allowPrivilegeEscalation: false
  defaultAllowPrivilegeEscalation: false
  allowedCapabilities: ['NET_ADMIN', 'NET_RAW']
  defaultAddCapabilities: []
  requiredDropCapabilities: []
  hostPID: false
  hostIPC: false
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  seLinux:
    rule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: flannel
rules:
- apiGroups: ['extensions']
  resources: ['podsecuritypolicies']
  verbs: ['use']
  resourceNames: ['psp.flannel.unprivileged']
- apiGroups:
  - ""
  resources:
  - pods
  verbs:
  - get
- apiGroups:
  - ""
  resources:
  - nodes
  verbs:
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - nodes/status
  verbs:
  - patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flannel
  namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-system
  labels:
    tier: node
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
            - matchExpressions:
              - key: kubernetes.io/os
                operator: In
                values:
                - linux
      hostNetwork: true
      priorityClassName: system-node-critical
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni-plugin
        image: rancher/mirrored-flannelcni-flannel-cni-plugin:v1.1.0
        command:
        - cp
        args:
        - -f
        - /flannel
        - /opt/cni/bin/flannel
        volumeMounts:
        - name: cni-plugin
          mountPath: /opt/cni/bin
      - name: install-cni
        image: rancher/mirrored-flannelcni-flannel:v0.18.1
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: rancher/mirrored-flannelcni-flannel:v0.18.1
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
            add: ["NET_ADMIN", "NET_RAW"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        - name: EVENT_QUEUE_DEPTH
          value: "5000"
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
        - name: xtables-lock
          mountPath: /run/xtables.lock
      volumes:
      - name: run
        hostPath:
          path: /run/flannel
      - name: cni-plugin
        hostPath:
          path: /opt/cni/bin
      - name: cni
        hostPath:
          path: /etc/cni/net.d
      - name: flannel-cfg
        configMap:
          name: kube-flannel-cfg
      - name: xtables-lock
        hostPath:
          path: /run/xtables.lock
          type: FileOrCreate

2、查看k8s集群的状态，Ready说明成功了